MARTIN - G8JNJ

ECLECTIC AETHER - Adventures with Amateur Radio

Blog

« Back to Blog « Older Entry | Newer Entry »

Updated several pages

Posted on October 18, 2011 at 8:45 AM

Hi All,

I have updated several pages as a holding measure, until I get more time to produce better documentation.

With the arrival of Winter weather in the UK, it looks like I'll be doing this sooner rather than later - except the good conditions on 10m are very distracting.

Regards,

Martin - G8JNJ

 

 

 

Categories: None

Post a Comment

Oops!

Oops, you forgot something.

Oops!

The words you entered did not match the given text. Please try again.

Already a member? Sign In

4 Comments

Reply Martin - G8JNJ
09:03 AM on January 16, 2012 
Hi Dave,

Sorry I'm not able to offer this service.

I'll send you a private email.

Regards,

Martin

dave stewart says...
I have two working 320 clansman units and one non working which are all USB only and I would like to get them modified for LSB use and have the power supply 1.8mhz and rf meter mods done I have read you articles and I feel sure that I would not be able to do this my self whilst I have some electronics experience would not be comforable doing this and I wonder if you could do this for me I would ship the units to you and pay you for the modifications and the return shipping costs If this is something you would do I would appreciate you letting me know my call sign is VE7-FBK
73 dave stewart +16047635895
Reply dave stewart
01:32 AM on January 14, 2012 
I have two working 320 clansman units and one non working which are all USB only and I would like to get them modified for LSB use and have the power supply 1.8mhz and rf meter mods done I have read you articles and I feel sure that I would not be able to do this my self whilst I have some electronics experience would not be comforable doing this and I wonder if you could do this for me I would ship the units to you and pay you for the modifications and the return shipping costs If this is something you would do I would appreciate you letting me know my call sign is VE7-FBK
73 dave stewart +16047635895
Reply Martin - G8JNJ
08:15 AM on January 10, 2012 
Sorry I think you are confusing me with Andrew, G4OEP

Take a look at his website

http://g4oep.atspace.com/rt320/rt320.htm

Regards,

Martin


Martin says...
Looking at modifying my PRC 320 for USB and for a display based on your design - may do it when I find suitable supply of low-ish cost parts. have a Gray Code Encoder in mind at 5$ NZ? does your software allow for the use of this type of encoder? (would like to perhaps purchase a couple of programmed PIC's) - Also - do you have any one who can make a reasonable PC Board ------ Love using my set on RX - even though it is a pain to tune - very sensitive.
Many thanks
Martin Blain
Reply Martin
02:37 AM on January 05, 2012 
Looking at modifying my PRC 320 for USB and for a display based on your design - may do it when I find suitable supply of low-ish cost parts. have a Gray Code Encoder in mind at 5$ NZ? does your software allow for the use of this type of encoder? (would like to perhaps purchase a couple of programmed PIC's) - Also - do you have any one who can make a reasonable PC Board ------ Love using my set on RX - even though it is a pain to tune - very sensitive.
Many thanks
Martin Blain